Used StrikoWestofen 1700 S ProDos XP Dosing Furnace: Precision, Efficiency and Cost Effectiveness
The used StrikoWestofen 1700 S ProDos XP combines precise aluminium dosing, stable melt conditions and reliable process technology with the economic benefits of a high-quality used machine.
What does the StrikoWestofen 1700 S ProDos XP offer?
The used StrikoWestofen 1700 S ProDos XP is designed for the controlled supply and precise dosing of molten aluminium in die casting cells.
Its closed dosing system draws aluminium from below the bath surface. This can reduce the amount of oxides and contaminants entering the casting process and minimise metal losses.
Precise metal supply as the basis for stable casting processes
The quality of an aluminium die-cast component does not depend on the die casting machine alone. The dosing quantity, metal temperature and melt quality must also remain within narrow process limits.
A high-performance dosing furnace supports repeatable casting weights, consistent production cycles and a reliable supply of molten aluminium to the die casting machine.
Consistent metal quantities
Precise dosing processes support consistent casting weights and repeatable process conditions.
Stable melt conditions
A consistent metal temperature reduces process fluctuations and supports uniform casting results.
Integration into die casting cells
The dosing furnace can operate together with the die casting machine as part of an automated production process.
What advantages does the StrikoWestofen dosing furnace offer?
The combination of a closed dosing system, ProDos XP control and stable temperature management supports economical and repeatable aluminium processing.
High dosing accuracy
Controlled metal delivery supports consistent dosing quantities for successive casting cycles.
- Repeatable metal quantities
- Consistent casting weights
- Stable production conditions
- Reduced process deviations
Withdrawal below the bath surface
The closed dosing system draws molten aluminium from an area below the melt surface.
- Fewer oxides in the dosing process
- Reduced contamination
- Support for high component quality
- Lower metal losses
Energy-efficient continuous operation
The furnace technology is designed for reliable operation and economical metal supply in series production.
- Efficient temperature holding
- High equipment availability
- Reliable continuous operation
- Reduced ongoing process costs
How the dosing furnace supports the aluminium die casting process
From holding the melt to controlled transfer to the die casting machine, every stage provides the basis for a repeatable production cycle.
Hold the melt
The furnace keeps the aluminium ready for production under controlled temperature conditions.
Set the dosing quantity
The required metal quantity is defined according to the relevant casting process.
Monitor the process
The ProDos XP control continuously monitors and regulates the dosing process.
Dose the aluminium
The defined quantity is transferred to the die casting machine in a repeatable manner.
Repeat the cycle
The automated process supports short and consistent production cycles.
Intelligent control for repeatable dosing processes
The ProDos XP system monitors the dosing process and regulates metal delivery according to the configured production parameters.
This allows individual dosing cycles to be adapted to the relevant casting process and carried out under repeatable conditions.
Control, repeatability and straightforward operation
The control system supports precise dosing quantities, short cycle times and high process reliability. This makes the equipment particularly suitable for automated die casting cells and recurring series-production processes.
- Precise dosing quantities
- Repeatable production conditions
- Continuous process monitoring
- Precise regulation of metal delivery
- Short and consistent cycle times
- High process reliability
- Straightforward operation
- Suitable for automated production lines
Reduced oxidation and contamination in the casting process
The method of metal withdrawal influences the quality of the dosed melt and therefore the stability of the subsequent die casting process.
Dosing below the surface
The molten aluminium is withdrawn from an area below the bath surface.
Reduced contact with surface oxides
Closed metal withdrawal can reduce the introduction of oxides into the subsequent casting process.
Cleaner metal supply
Controlled dosing supports a consistent metal supply with minimal contamination.
Reduction of metal losses
Reduced oxidation and controlled dosing quantities can improve the economical use of aluminium.
What added value does precise aluminium dosing provide?
Repeatable dosing quantities and stable metal conditions support the quality, productivity and cost effectiveness of the entire die casting cell.
Consistent casting weights
Uniform metal quantities support repeatable components and stable production conditions.
Reduced scrap
Controlled dosing and temperature conditions can reduce the number of defective cast components.
Stable cycle times
Automated and repeatable sequences support consistent production cycles.
Lower process costs
Reduced metal losses and efficient operation improve overall cost effectiveness.
Integration of the dosing furnace into a die casting cell
In an automated die casting cell, the metal supply must be coordinated with the machine cycle both technically and in terms of timing.
The StrikoWestofen 1700 S ProDos XP supports defined metal transfer and can therefore be integrated into recurring production processes.
Coordinated process signals
Dosing is triggered and monitored in accordance with the relevant machine cycle.
Consistent production sequences
Repeatable dosing times support stable and predictable equipment operation.
Controlled metal transfer
Monitored dosing processes reduce manual intervention and improve repeatability.
Why purchase a used dosing furnace?
High-quality foundry furnaces are designed for a long industrial service life. A technically suitable used dosing furnace can therefore be an economical alternative to new equipment.
In addition to lower acquisition costs, buyers often benefit from faster availability and technology that has already proven itself in industrial operation.
Lower acquisition costs
Used equipment can significantly reduce the required investment compared with an equivalent new system.
Shorter delivery and project times
Equipment that is already available can often be integrated into production planning more quickly.
System proven in operation
The equipment is based on established dosing and furnace technology for industrial aluminium die casting.
Economical expansion of capacity
Lower investment costs can enable rapid economic use of the additional production capacity.
Continuing to use existing foundry technology economically
Reusing high-quality industrial equipment extends its service life and reduces the need for completely new production.
- Extension of the equipment service life
- Continued use of existing industrial resources
- Reduced need for new production
- Economical expansion of production capacity
- Proven technology instead of complete replacement
- Faster availability than many new systems
- Lower investment volume
- Sustainable use of high-quality branded equipment
Used foundry furnaces with technical and logistical support
FISS supports companies with the selection, procurement, dismantling and international relocation of used foundry equipment.
- Over 40 years of experience in foundry technology
- International marketing of used machinery
- Technical consulting during equipment selection
- Procurement through a worldwide network
- Used dosing, melting and crucible furnaces
- Technical assessment of the equipment scope
- Professional dismantling and loading
- Export packaging and international logistics
- Overhaul and modernisation
- One contact for the complete project
Which production tasks is the dosing furnace suitable for?
The StrikoWestofen 1700 S ProDos XP can supplement an existing aluminium die casting cell or provide additional production capacity.
Replacing an existing dosing furnace
The equipment can replace furnace technology that is no longer technically or economically suitable.
Expanding die casting production
An additional dosing furnace can supply new or expanded machine capacity with molten aluminium.
Integration into automated casting cells
Controlled dosing technology supports recurring and automatically coordinated production sequences.
Further offers for used foundry furnaces
Buy used dosing furnaces
Available furnace systems for the controlled metal supply of die casting machines.
Foundry furnacesView further used furnaces
Melting furnaces, crucible furnaces, dosing furnaces and additional furnace technology for industrial foundries.
Furnace serviceOverhaul and modernisation
Technical inspection, repair and modernisation of used foundry furnaces.
Questions about the StrikoWestofen 1700 S ProDos XP
What type of furnace is it?
What is the purpose of a dosing furnace?
What is the advantage of the closed dosing system?
What does the ProDos XP control system do?
Can the dosing furnace operate automatically?
What production benefits does the equipment offer?
Why can a used dosing furnace be economical?
Does FISS also support dismantling and transport?
Do you need a dosing furnace for your aluminium die casting production?
Tell FISS the required furnace size, alloy, dosing quantity, die casting machine, equipment control and intended location. Our team will review the requirements and support you with selection, technical assessment, dismantling, transport and commissioning.
Telephone: +49 (0)7181 60696-0 · Email: info@fiss-machines.com
